Automatic Drink Dispenser for 12 Shot Glasses

Twelve portions in one dispensing cycle

This automatic dispenser fills 12 shot glasses in sequence from a single bottle. Its moving tap travels along the prepared row and releases the selected portion into each glass. There is no need to pour every serving by hand or carry the glasses one at a time to a stationary spout. The arrangement keeps table preparation orderly when a complete set of portions needs to be made ready at once.

The mechanism is built into a closing brown wooden case. Space inside the enclosure accommodates the glasses and the dispenser components, keeping the main parts together without separate storage boxes. The lid carries themed engraving. The unit measures 45.4 × 35.6 × 12 cm and has a listed weight of 4,340 g. These figures should be considered when choosing a stable position on the table and reserving storage space for the case.

How the dispenser operates

Before starting, place all 12 glasses in their designated positions. Lower the food-grade hose into a bottle standing beside the case, then connect the unit by USB to a compatible external power source. Select the required serving volume and begin the cycle. The drink travels through the hose to the dispensing mechanism while the tap moves along the row and fills the glasses one after another. The tap’s path must remain clear during operation, and the end of the hose should stay immersed in the liquid.

• Twelve 50 ml glass shot glasses provide a complete set for sequential filling.
• Adjustable portion control allows the required serving volume to be set before dispensing begins.
• The food-grade hose feeds the drink directly from the selected bottle.
• USB connectivity is intended for a compatible power source, including a power bank.
• The closing wooden case keeps the mechanism, drinkware, and accessories in one enclosure.

Set contents and preparation

The set includes the automatic dispenser, 12 glass shot glasses, a food-grade hose, and a USB cable. Position the case on a level horizontal surface and align every glass with its corresponding filling point. A short cycle with clean water can be performed before first use. This checks the placement of the glasses, the flow through the hose, the movement of the tap, and the selected portion before a drink enters the feed path.

Cleaning after use

Rinse the glasses and food-grade hose with warm water, remove any remaining liquid from the hose, and let it dry completely. Clean the wooden enclosure with a soft dry or slightly damp cloth. Do not immerse the case or the mechanism housed inside it in water. Store the set only after all parts that contact the drink have dried.