Automatic Fire Truck Drink Dispenser for 4 Shot Glasses

This automatic drink dispenser is styled as a fire truck and configured for four 50 ml shot glasses. The themed arrangement combines a red truck with a ladder, a moving decorative boom, and a presentation base finished with contrasting hazard stripes. It is more than a tabletop model: the built-in mechanism draws a drink from its bottle and fills the prepared glasses in sequence, making the pour a visible part of the presentation.

How the dispenser works

The drink travels directly from the bottle through a food-grade tube, so there is no need to transfer it into a reservoir inside the body. Place the free end of the tube in the bottle, arrange the glasses in their designated positions, select the serving volume, and start the device. During operation, the decorative boom moves along the row and fills the glasses one after another. The adjustable setting allows each serving to remain within the 50 ml capacity of the glass.

• Four 50 ml glass shot glasses provide a practical format for preparing a matching round for a small group.
• Adjustable serving volume helps set the same amount for every glass without filling each one to the rim unnecessarily.
• A removable food-grade tube connects the bottle to the dispensing mechanism and can be rinsed after use.
• USB power allows the device to operate from a compatible external source; the automatic mode requires this connection.

Construction and materials

Plywood is used in the base, while the truck model and selected components contain plastic parts. Printed graphics continue the fire-service theme, and the ladder with the moving boom gives the model its recognisable emergency-vehicle outline. The functional components share one tabletop platform, bringing the glasses, dispensing mechanism, and decorative truck into a single arrangement. The dispenser is intended for measured servings of spirits such as vodka, cognac, whisky, rum, or tequila.

Setup, manual operation, and care

Before starting, place the base on a level, stable surface, straighten the tube without sharp bends, and check the position of all four glasses. It is useful to begin with a small serving so the setting can be checked and adjusted before a complete cycle. Manual control is available when no USB source is connected, while sequential automatic dispensing is performed with external power attached.

After use, detach the tube and rinse it with clean water so drink residue does not remain inside. Wash the shot glasses separately in the usual way. Wipe the body, truck, and base with a cloth rather than immersing the device in water. Let the tube and all surfaces dry fully before storage. This routine keeps the drink path clean and prepares the dispenser for its next use without unnecessary disassembly.