Fire Stand for Saj Pan with 95 cm One-Piece Legs and 40 cm Bowl

This stand creates a separate fire position beneath a saj pan for outdoor cooking. Fuel is placed in a round metal bowl measuring 40 cm in diameter and suspended between the supports. The flame is held at a defined height below the cookware, while embers and ash remain inside the bowl rather than spreading around the setup area. The complete product weighs 4.9 kg, a useful consideration when planning transport and storage with other outdoor cooking equipment.

One-piece supports and a suspended bowl

The structure is based on a tripod with long one-piece legs measuring 95 cm. Each support is made as a single section and does not separate into shorter parts. There are no leg halves to join before setting up, although the full support length should be considered when choosing vehicle and storage space. The fire bowl hangs from three chains positioned around its perimeter and sits at the centre of the tripod beneath the saj pan placed above it.

• The suspended bowl separates the fuel area from the ground and keeps embers and ash together in one defined space.
• The one-piece long legs require no sectional joining before the fire position is prepared.
• Three suspension points support the bowl from different sides; the chains should be checked for twists before every use.
• The short 5 cm legs provide a low configuration for a stable, non-combustible base designed to tolerate intense heat.

Setup and cookware selection

For the full-height configuration, place the tripod on firm, level ground and spread the supports until the structure remains steady. The suspended bowl should hang evenly, stay clear of the legs and remain still. Select the saj pan separately according to its dimensions and support arrangement: the cookware must sit securely above the fire and resist shifting while in use.

The stand is intended for outdoor operation. Clear dry grass from the setup area and maintain suitable distance from low branches, combustible surfaces and objects affected by intense heat. Never place the low configuration on ordinary furniture or another base that is not designed for exposure to fire. Do not move the tripod, change the suspension position or remove the bowl while fuel is burning. Make every adjustment only after all metal parts have cooled completely.

After use, allow the bowl to cool fully, remove ash and remaining fuel, then clean and dry the components. Inspect the chain links and their attachment points before lighting another fire. Store the one-piece legs without sideways pressure so other equipment does not bend the long supports. The set consists of the fire bowl, the stand with long one-piece legs and the short legs used for the low arrangement.