Automatic Alcohol Dispenser for 4 Shot Glasses with Lighting

Four servings under one control system

This automatic dispenser is designed to work with four shot glasses at the same time. Instead of filling each glass in sequence, it channels the drink through a single dispensing system connected to a food-grade hose. The format is intended for spirits and other drinks normally served in small portions. The housing is arranged as a closing case with a lid and latch, giving the unit a compact form when it is not being used and a distinct presence as part of a table setup.

Individual portions and two dispensing modes

The serving volume can be configured separately for each of the four glass positions. This means the dispenser is not limited to pouring the same amount into every glass: different values can be selected when individual servings are required. Automatic mode runs the configured dispensing cycle, while manual mode provides direct control during filling. Switching between these modes supports either a coordinated round for the group or the preparation of a separate portion without modifying the unit.

A color screen provides access to the available controls, including mode selection and portion settings. The statistics function tracks the volume that passes through the dispensing system during use. Adjustable lighting adds a visual effect while the glasses are being filled and makes the occupied positions more noticeable in subdued lighting.

Contents of the standard set

• the dispenser with four designated shot-glass positions;
• four shot glasses for coordinated or individually configured servings;
• a food-grade hose that carries the drink from its bottle to the dispensing mechanism;
• a USB cable for connecting the power supply.

A battery and power bank are not part of the standard set. Additional options include musical accompaniment, engraving on the shot glasses, alternative designer glasses, and a color image printed on the lid. These extras alter the appearance, power arrangement, or sound effects, but they are not required for the dispenser’s basic operation.

Setup, use, and routine care

Before dispensing, place each glass on its designated position and insert the free end of the food-grade hose into the drink bottle. Connect the unit with the USB cable, select the required portions, and choose the preferred control mode. The glasses should stand level in their positions so the flow is directed into each vessel. When changing to a different drink, clear the dispensing path of residue from the previous liquid first.

After use, flush the food-grade hose with water rather than leaving liquid inside the channel. Wash the shot glasses separately and wipe the housing with a soft dry or slightly damp cloth. The case itself should not be immersed in water. Keep the dispenser in a dry location away from intense heat and direct sunlight. This routine helps keep the drink path, screen, outer surfaces, and designated glass positions clean between uses.