T-72 Tank Automatic Drink Dispenser for 4 Shot Glasses

The T-72 Tank automatic drink dispenser is designed to serve measured drinks into 4 shot glasses. Its central element is styled as a decorative tank that turns during the operating cycle and participates in filling the positioned glasses in sequence. The device therefore combines the function of a tabletop dispenser with a distinctive themed presentation. The 4-glass configuration prepares four portions without requiring each glass to be poured directly from the bottle by hand.

How the dispensing system works

The drink is drawn from a separate bottle through a hose placed inside the container. The shot glasses sit in their designated positions beneath the dispensing mechanism. Once the dispenser is connected to a power source, the user selects the required portion and starts the cycle. The mechanism distributes the drink among the glasses, while the portion control allows the pour to be matched to the glassware in use. Power can be supplied from the mains or a Power Bank, and the bottle does not need to be mounted on the platform itself.

Preparation and operation

• Position the dispenser. Use a level, stable surface and leave clear space in front of the glasses so they can be removed without touching the moving section.
• Place the 4 shot glasses. Each glass must sit in its intended position beneath the path of the dispensing mechanism. Shot glasses are included with this configuration.
• Connect the drink. Lower the end of the hose into the bottle far enough for it to draw liquid throughout the complete cycle.
• Set the portion. Connect the power source, choose the appropriate serving amount, and then start automatic dispensing.
• Finish the cycle. Wait until filling has stopped, switch off the device, and carefully remove the shot glasses and hose.

Cleaning after use

The shot glasses and hose should be rinsed after every serving session so that drink residue is not left inside. Use cool or slightly warm water for the hose and avoid cleaning agents: pass the water through the channel until it is clear, then allow the components to dry fully. Wipe the body with a dry or lightly damp cloth without flooding the mechanism. Store the dispenser in a dry place away from heat sources and direct sunlight. Before the next cycle, the hose should be clean and all 4 shot glasses should be seated correctly.

Purpose of this model

The T-72 styling suits a themed table arrangement, a home bar, or a gift set for someone interested in military vehicles. The decorative miniature is an operating part of the dispensing presentation rather than a separate display figure. The 4-glass version is intended for situations where four measured servings and one automatic cycle are required. Operation calls for the supplied glassware, a separate drink bottle, the hose, and a suitable power source; once serving is complete, the parts that contact the liquid are rinsed and dried before storage.