John Deere-Style Automatic Combine Drink Dispenser for 4 Shot Glasses

This automatic drink dispenser takes the form of a miniature combine harvester and is configured to fill four shot glasses in measured portions. Its green-and-yellow finish, cab, header, wheels, side ladder and roof signals create the recognisable appearance of agricultural machinery in the John Deere style. The working dispenser is integrated with the decorative model, making the product both a tabletop serving device and a themed display piece.

Adjustable portion dispensing

The drink is drawn directly from a bottle through a food-grade tube. To prepare the dispenser, place the free end of the tube in the bottle and arrange the four shot glasses at their designated positions. Electronic controls and a display allow the user to select both the number of glasses and the amount dispensed into each one. The highest selectable serving is 50 ml, and this value is set before the dispensing cycle starts.

Two operating methods are available. In manual mode, the user selects the serving volume and number of glasses, then starts the cycle with the control button. Automatic mode is intended for filling an individual glass when it is positioned beneath the outlet, without a separate button press. These modes allow the dispenser either to prepare the four servings in sequence or to fill one glass at a time as required.

Construction and included items

• Format: automatic tabletop dispenser configured for four shot glasses.
• Decorative design: a green-and-yellow combine miniature with a detailed cab and harvesting header.
• Base: a plywood body supporting the model, controls and positions for the glasses.
• Liquid path: a food-grade tube that draws the drink from its bottle.
• Glassware: four glass shot glasses, each with a capacity of 57 ml.
• Portion setting: up to 50 ml, leaving a margin below the full capacity of the supplied glass.

Setup and cleaning

Set the dispenser on a stable, level surface before positioning the glasses, placing the tube in the drink and selecting the operating method. Two figures should be kept distinct during setup: 57 ml is the capacity of each glass, while 50 ml is the largest portion available on the display. After use, draw clean water through the tube and internal liquid path by running a normal dispensing cycle. Clean the decorative model, plywood base and electronic controls separately without immersing them in water.

This four-glass configuration should be distinguished from similar five- and six-position dispensers. Its compact serving arrangement suits a home bar or a themed gift for someone connected with farming, agricultural machinery or miniature vehicle collecting.