Automatic Excavator Drink Dispenser with 6 Shot Glasses

The automatic Excavator drink dispenser fills six shot glasses in sequence while recreating the motion of a miniature construction machine. A food-grade hose carries the drink to the bucket, which moves between the individual glass positions. The serving amount is set before the cycle begins, allowing the machine to dispense an equal portion into each correctly positioned glass without pouring directly from the bottle by hand.

How the dispensing cycle works

The bottle is placed beside the unit and the free end of the hose is lowered into the drink. Six glass shot glasses fit into the circular openings in the base. Once the serving volume has been selected, the excavator brings its bucket to each position in turn. The moving part both imitates the action of construction machinery and directs the drink towards the intended glass.

Power is supplied through a USB connection, so the dispenser can be connected to a compatible external source such as a portable power bank. The supplier lists a built-in battery as a separate option rather than a confirmed part of the standard version. Preparing the dispenser therefore requires a suitable power source, a bottle and enough adjacent space for the cable and hose.

Construction and measurements

• Product type: automatic tabletop drink dispenser styled as an excavator.
• Shot glass positions: 6.
• Capacity of each glass: 50 ml.
• Base dimensions, L × W × H: 27.5 × 27.5 × 6.2 cm.
• Overall height with excavator: 20 cm.
• Product weight: 1750 g.
• Materials: plywood base, plastic excavator model and food-grade hose.
• Power: USB connection.
• Control: serving-volume setting followed by an automatic cycle.

The 27.5 × 27.5 cm base defines the footprint of the unit, but additional room is needed beside it for the bottle and power lead. All six openings face the moving section of the excavator and are sized for the included 50 ml glasses. The glassware can be removed from the base and used separately when the dispensing function is not required.

Setup and cleaning

Before starting, each glass should sit fully in its designated opening. The end of the hose must remain submerged throughout the dispensing cycle so that it does not draw in air before the final serving. The required amount is then selected and the machine is started. When fewer than six positions are being used, the operating mode should be chosen through the dispenser’s own controls; unrelated glassware of a different height or diameter should not be placed beneath the moving bucket.

After use, rinse the glasses and the drink path with warm water so that liquid does not remain inside the hose. Wipe the outside surfaces with a cloth while keeping moisture away from the internal mechanism and USB connection. Allow the hose and glasses to dry completely before storage. Keep the dispenser in a dry location away from direct sunlight and strong heat sources.