Portable Single-Burner Gas Stove with Piezo Ignition, Case and Canister

This portable single-burner gas stove is intended for cooking and reheating food away from a permanent kitchen. Its format suits camping, picnics, holiday cottages, and vehicle-based trips. Piezo ignition lights the burner through an integrated mechanism, while the gas control lets the user select a suitable flame for boiling water, reheating food, or cooking a meal. The stated set includes the stove, a plastic carrying case, and one gas canister.

Stove construction and canister connection

The stove operates from a standard bayonet-style gas canister. Its construction includes a wind shield that reduces the direct effect of crosswinds on the combustion area, together with protection against incorrect canister installation. The single burner provides one compact cooking position, and the adjustable gas supply changes the heat without moving the cookware. For stable operation, use cookware with a level base suited to the stove’s support area.

The appliance measures 30 × 25 × 5 cm without its case and weighs 1.3 kg. Packed in the carrying case, the set measures 35 × 30 × 10 cm and weighs 1.85 kg. These figures make it possible to plan space in a vehicle, camping box, or cupboard before packing. The plastic case keeps the cooled stove separate from other equipment and has an integrated carrying handle.

Confirmed product details

• Type: portable gas stove with one burner.
• Ignition: integrated piezo ignition.
• Connection: standard bayonet-style gas canister.
• Control: adjustable gas supply.
• Equipment: wind shield and protection against incorrect canister installation.
• Set contents: stove, plastic carrying case, and one gas canister.

Preparing the stove for use

Close the control before installing the canister and check that the connection is clean. Insert and lock the canister in the sequence specified in the stove instructions. Place the appliance on a level, stable, non-combustible surface outdoors or in a continuously ventilated location. Make sure the cookware is centred above the burner and does not make the stove unstable. After ignition, increase the gas flow gradually until the flame is appropriate for the cooking task.

If the flame goes out, gas can be smelled, or the connection is not operating correctly, close the control immediately. Do not attempt to relight the burner until the canister has been disconnected, the area has been ventilated, and the cause has been resolved. Never leave a lit burner unattended or move the stove while the flame is burning.

Cleaning and storage

After use, shut off the gas, disconnect the canister, and allow the body to cool completely. Remove cooking residue with a soft damp cloth without immersing the stove in water, then wipe the surfaces dry. Keep the burner, canister connection, and piezo mechanism clean and dry. Put only a cooled appliance into the case. Store the canister according to the instructions on its label and keep it away from flames, heating appliances, and direct sunlight.