Foldable Stainless Steel Case Grill for 8 Skewers, 2 mm

A picnic grill that folds into a carrying case

This model provides eight skewer positions and is designed for countryside trips, fishing, camping, or outdoor cooking at home. Once the grill has cooled and been cleaned, its panels fold into a flat metal case. This format takes up less storage space than a permanently assembled brazier and is easier to place in a car boot, utility room, or compact outdoor equipment area. An integrated handle makes it more convenient to carry the folded unit between the vehicle and the cooking spot.

When opened, the product becomes a rectangular raised brazier with an exposed charcoal bed. Eight shaped rests along the upper edges define the skewer positions and help distribute portions across the available length. Decorative cut-outs give the side panels a distinctive appearance, while the unpainted silver finish retains the recognisable look of stainless steel.

Construction and confirmed specifications

• Stainless steel body. The unpainted metal construction is suitable for repeated outdoor cooking and does not rely on a decorative paint layer that would need to be restored.
• 2 mm steel thickness. This is a useful comparison point when choosing between thin travel braziers and heavier permanent outdoor grills.
• Eight skewer positions. The working length allows several portions to cook at the same time without requiring a large fixed installation.
• Assembled size: 50 × 31 × 49.5 cm. The stated height is 50 cm, the width is 31 cm, and the length is 49.5 cm.
• Foldable case layout. The side sections form the working brazier and fold away after the entire unit has cooled, creating a more compact format for carrying and storage.
• Suitable fuels: charcoal or firewood. The fuel can be selected according to the preferred way of preparing an ember bed and the conditions at the cooking site.

Setting up the grill

Choose a level, non-combustible outdoor surface with clear space around it. Open the body fully, place the legs in their working position, and check that the panels are properly seated before lighting the fuel. The grill should stand evenly without rocking or leaning. These simple checks are particularly important on grass, soil, or an uneven campsite where the support points may settle after the grill is loaded.

The eight rests indicate how the skewers are spaced, but skewers still need to be selected by their usable length. Each one should bridge the brazier securely, rest on both sides, and remain stable when it is turned. The 49.5 × 31 cm footprint also helps when planning the cooking area or choosing an optional grate. If a separate grate is to be used, compare its supporting dimensions with the length and width of the brazier rather than relying only on a general product label. Accessories not expressly listed with the grill should not be assumed to be included.

Cleaning, folding, and storage

Do not fold the case immediately after cooking. Allow the steel, embers, and ash to cool completely without rapid cooling, then remove the remaining fuel and loose residue. Clean the surfaces with a suitable brush or dry cloth. Before closing the panels, check that the body is dry and that no damp ash or food residue is trapped inside the folded case. Store the grill in a dry place protected from rain and prolonged exposure to moisture.

The stainless steel case grill combines space for eight skewers with a layout intended for transport. It is a practical option when a group-sized cooking surface is needed for a picnic, yet the equipment must be packed away after the meal instead of occupying a permanent barbecue area.