Folding Suitcase BBQ Grill, 3 mm Steel, 6 Skewers, Black

A take-apart grill for picnics and road trips

This model is intended for cooking kebabs at a summer house, beside a river, at a campsite, or in another properly prepared outdoor area. Once every metal section has cooled completely, the walls and supports pack into a flat metal suitcase. The case format keeps the dismantled pieces together and is easier to arrange in a car boot than a fixed firebox. An integrated handle provides a practical grip when carrying the closed grill between the vehicle, storage space, and cooking site.

Firebox design

Separate steel panels form a rectangular charcoal firebox supported by removable legs. Its opposite edges provide six paired positions for skewers. The notches are arranged at two levels, allowing food to be placed higher or lower in relation to the charcoal during cooking. Stiffening ribs reinforce the side walls and help limit bending as the metal heats. The black painted finish is combined with decorative cut-outs: a tank silhouette appears on the firebox wall, while the legs carry additional ornamental designs.

• Material: 3 mm steel.
• Capacity: 6 designated skewer positions.
• Leg length: 35 cm.
• Folded dimensions: 335 × 240 × 55 mm.
• Weight: approximately 6.8 kg.
• Configuration: a take-apart firebox that packs into a handled suitcase.

Cooking outdoors

The grill should stand on a level, non-combustible surface away from dry grass and other materials that can ignite easily. Its detachable legs raise the firebox above the ground, while the open rectangular layout leaves every skewer accessible for turning and checking the food. The two notch levels provide manual control over the distance from the heat, so the position can be adjusted to suit the condition of the charcoal and the food being cooked. The assembled grill must remain stationary while fuel is burning. Carrying, dismantling, or closing the case is appropriate only after combustion has stopped and all metal parts are fully cool.

Cleaning and storage

After cooling, ash and spent charcoal can be removed before the surfaces are cleaned with a dry brush. Every panel and support should be completely dry before the grill is folded. Moisture-free storage is particularly important for a painted steel product because dry sections do not trap dampness inside the closed body. Keep the suitcase in a dry place where its painted surfaces will not remain in contact with wet ground or exposed to precipitation between outdoor meals.