Double Stainless Steel Grill Basket 38×43×70 cm

This double grill basket is designed for cooking meat, fish, seafood, and vegetables on a conventional charcoal brazier without threading the ingredients onto skewers. Food is held between two mesh panels, allowing the entire batch to be turned in one movement with the long handle. The open grid exposes the contents to heat from both sides, while the upper panel helps retain individual pieces as the basket is turned.

Format and brazier fit

The product has overall dimensions of 38×43×70 cm. When checking the fit, compare this complete size with the width of the firebox, the position of its upper supporting edges, and the free space available on the handle side. The basket rests on top of a conventionally shaped brazier and does not require a separate attachment to its body. Its mesh section needs stable support above the charcoal, while the extended handle should remain outside the main heated area.

• Double mesh construction. The lower and upper panels form a basket for a single batch of food. This arrangement lets all loaded pieces be turned together instead of handling every portion separately.
• Stainless steel metal section. This material is used for the mesh panels, their surrounding frames, and the long metal part of the handle. After cooking, the basket can be cleaned with a regular dish sponge or brush.
• Wooden grip. The grip is positioned at the end of the metal handle and provides a dedicated holding section. During use, it should be kept away from direct flame and the hottest part of the brazier.

Loading the basket

Meat, fish, seafood, or vegetables are best spread across the mesh without forming a high pile, leaving small gaps between individual pieces. An even layer allows the upper panel to close normally and helps keep the contents inside while turning. Portion thickness should be chosen so that both panels can take their working position without applying excessive pressure to the food.

Before lighting the charcoal, first check the position of the empty basket. Both sides of the mesh section should have reliable support, and enough clearance is needed for a complete movement of the handle. This is particularly important when the brazier stands near a wall, the side of a gazebo, or other objects. After loading, check that no pieces extend beyond the frame or obstruct the closing of the basket.

Cleaning after use

Allow all metal sections to cool fully before cleaning. Remove food residue from both panels, paying attention to wire intersections and the inner sides of the frames. Dried particles may first be softened with warm water and then removed with a sponge or brush. Rinse the cleaned basket, dry it thoroughly, and store it in a dry place. Do not leave the wooden section immersed in water for long periods or expose it to open flame.