Automatic Combine Harvester 2 Dispenser for 4 Shot Glasses

Four servings staged as a tabletop performance

Combine Harvester 2 is an automatic drink dispenser that integrates a functional pouring mechanism with a green model harvesting machine and a themed base. Four dedicated shot-glass positions surround the circular operating area. During a cycle, the model travels from one position to the next and fills the glasses in sequence.

This version is configured for four included shot glasses, each with a 50 ml capacity. Drink is drawn from a separate bottle through a food-grade silicone hose. The serving amount is selected on a control panel with a display and regulator. Automatic and manual modes are provided, and the required mode is chosen before starting.

Construction and included components

• Wooden base. The shared platform carries the circular route, four glass positions and the control panel.
• Moving harvester model. The green machine, front header and unloading pipe travel between the prepared serving positions.
• Four 50 ml shot glasses. Their number and capacity match this dispenser configuration.
• Food-grade silicone hose. It links the dispenser to the bottle and can be removed for rinsing.
• USB cable. The standard version connects to an external wall adapter or power bank and does not contain a built-in battery.

Setup and operation

Place the base on a stable, level surface and keep the entire circular route clear. Set out the four included glasses, lower the hose into the bottle and connect the USB cable to a suitable power source. Select an amount no greater than 50 ml on the display, then start the required mode.

Do not move the platform or reposition a glass while the model is travelling. If you prefer different glassware, check its height and diameter before starting: all four glasses must stand securely, remain separate from one another and stay outside the path of the header and harvester body. This keeps the stream directed into each glass when the model reaches its corresponding stop.

Cleaning after use

Remove the hose from the bottle and rinse the full liquid path with warm water. Wash the shot glasses separately. Wipe the base, model and control panel with a soft dry or slightly damp cloth, keeping water away from the display, button and USB port. Let the hose and glasses dry completely before storage. Position the dispenser so the projecting header and unloading pipe are not pressed against nearby objects.