Automatic Excavator Dispenser for 4 Shot Glasses

The automatic Excavator dispenser for 4 shot glasses combines measured drink service with the movement of a miniature construction machine. Liquid is drawn through a hose from a bottle placed beside the unit, while the moving bucket works in sequence over the prepared glasses. The device therefore has a clear serving function and also makes the pouring cycle a visible part of the table presentation.

How the dispensing cycle works

The excavator model is mounted on a base arranged for four shot-glass positions. Before starting, lower the hose into the bottle, connect the unit to an external battery, set the required serving volume, and press the control button. Dispensing then proceeds automatically: the mechanism moves the bucket and delivers the drink to the positioned glasses one after another. Portion adjustment lets the user determine the quantity for each fill before the cycle begins. Start another cycle only after the glasses have been returned to their correct positions.

Confirmed specifications

• Configuration: the variant is designed for 4 shot glasses.
• Base dimensions: 27.5 × 27.5 × 6.2 cm.
• Height with the excavator: 20 cm.
• Device weight: 1550 g.
• Drink intake: from a separate bottle through a hose.
• Controls: portion selection followed by push-button start.
• Dispensing principle: automatic sequential pouring with bucket movement.
• Power source: an external power bank.

The base measurements make it easier to reserve room on a table or bar counter. In addition to the 27.5 × 27.5 cm footprint, the unit needs clear space above and in front of the excavator so the bucket does not touch glassware or nearby objects. Place the base level, set each glass squarely in its designated position, and check the outlet against the centre of the receiving glass before the first cycle. Do not pinch, sharply bend, or pull the hose between the bottle and the housing.

Glassware and cleaning

Use clean, dry shot glasses that sit squarely in the designated positions without obstructing the bucket. When changing the bottle, stop the mechanism first and then move the hose without pulling on the housing. Keep the external battery cable outside the model's working path.

After use, rinse the hose with warm water so drink residue does not remain inside. Wipe the housing with a soft, dry cloth. A slightly damp cloth can be used on a local mark, but liquid must be kept out of the interior. Let the hose and surfaces dry before storage.