Tall Collapsible Stainless Steel Mangal for 14 Skewers with Firewood Shelf

This tall collapsible stainless steel mangal accommodates 14 skewers at the same time. Its capacity supports a substantial batch of kebabs while preserving separate access to every position. The firebox sits between broad side supports and is raised above the ground, allowing the cook to turn food and remove finished skewers while standing. A shelf below provides a defined place for prepared firewood, keeping it away from grass and soil.

Cooking area layout

The rectangular firebox forms an open cooking area. Individual skewer notches run along its edges. They define positions above the charcoal and keep the skewers separated, so any one of them can be turned or removed independently. The upright panels support the firebox, while the lower horizontal panel links the structure and serves as a shelf for fuel.

The mangal is made of stainless steel and assembled from flat sections. The parts engage through dedicated connecting slots, so assembly requires neither bolts nor hand tools. Once the unit has cooled after use, the sections can be separated. The resulting flat components take up less room in seasonal storage and are easier to arrange in a vehicle. Before lighting the charcoal, check that every section is fully seated in its intended slot and that the body stands level without rocking.

Confirmed design details

• Separate positions: the skewers line up along the firebox while each remains independently accessible.
• Raised cooking level: the side supports hold the firebox above the surface, eliminating the need for a separate table while cooking.
• Lower shelf: the space between the supports holds a supply of prepared firewood.
• Decorative finish: the front panel carries a cut-out “Слава Україні” inscription, and openwork trident motifs decorate the side supports.

Placement and care

The mangal is intended for outdoor cooking on skewers over charcoal. Place it on a level, non-combustible surface with adequate clear space around the body. Before cooking, verify the assembly and stability of the unit. Firewood kept on the lower shelf should not be stacked so high that it touches the firebox.

Begin cleaning only after combustion has completely stopped and the metal has cooled. Remove ash and remaining fuel from the firebox, then clean the accessible surfaces, connecting tabs, and slots without impact. Wipe the metal dry after cleaning. Store the separated panels in a dry location without heavy items resting on top, helping the flat sections and joints retain their shape for the next assembly.