High Collapsible 3 mm Steel Charcoal Grill for 10 Skewers with Firewood Shelf

For backyard cookouts and outdoor trips

This high collapsible charcoal grill accommodates 10 skewers at the same time and is intended for cooking meat, poultry, fish, or vegetables over hot coals. Its capacity suits a family meal or a gathering with friends, allowing a substantial batch of food to be cooked without dividing the process into numerous small rounds. The structure stands 85 cm high, placing the skewer level at a more comfortable working height than a low portable firebox.

The grill can be used in a private yard, at a country house, on a picnic, during a camping trip, or while fishing. Its knock-down construction means it does not need a permanently reserved spot. Once the steel has cooled and the grill has been cleaned, the panels can be separated for storage or transport in a vehicle. When assembled, it becomes a full-size elevated brazier with a dedicated area below the firebox for keeping firewood or charcoal close to the cooking station.

Construction and confirmed dimensions

The main components are made of 3 mm steel. The confirmed dimensions of this 10-skewer version are 85 × 35 × 63 cm, listed as height, width, and length. Positions along the upper edges support the skewers, while the open rectangular design provides access to the coals and food from different sides. Before choosing this model, compare its 63 cm length with the available space in the yard, vehicle, and dry storage area.

• Capacity: the structure is configured for 10 skewers, making it suitable for a family or a group of friends.
• Steel thickness: the 3 mm specification is a useful point of comparison between grills of a similar format.
• Overall size: the 85 cm height, 35 cm width, and 63 cm length apply specifically to the 10-skewer model.
• Collapsible format: the panels join together for cooking and can be separated after the grill is completely cool.
• Lower shelf: the space beneath the firebox provides a dedicated place for a supply of firewood or charcoal.

Practical details for outdoor cooking

The side panels feature decorative flame-shaped cut-outs that give the otherwise functional structure a distinctive appearance. This makes the grill equally appropriate for occasional trips and a regular backyard cooking area. Elongated hand openings in the end panels make the separate components easier to hold during assembly and disassembly. The grill should only be handled or moved after combustion has stopped and every steel part has cooled completely.

The shelf under the brazier helps keep the cooking area organized. Fuel remains nearby without occupying the table used for ingredients, utensils, and prepared food. The collapsible construction is particularly useful when the grill is only needed for weekends or gatherings. It can be assembled before guests arrive, carried in a vehicle for a countryside outing, and stored afterward instead of remaining outdoors as a permanent fixture.

Setup, use, and care

Place the grill outdoors on a level, non-combustible surface away from flammable objects. Before lighting the fuel, make sure the panels are connected correctly, the structure stands evenly, and the skewers fit freely in their designated positions. Cooking can be done over firewood burned down to coals or ready-to-use lump charcoal. Cooking grates, pokers, skewers, and rotating mechanisms should be selected separately according to the actual brazier dimensions; they should not be assumed to be part of this configuration.

After cooking, allow the grill to cool fully, remove the ash, and clean food residue from the steel surfaces. Keeping the disassembled components in a dry place helps maintain the metal in tidy condition between uses. Choose this version when you specifically need a high collapsible grill for 10 skewers with confirmed 85 × 35 × 63 cm dimensions, 3 mm steel construction, and a separate shelf for solid fuel.